SMC Networks SMC8036TX Manuale Utente Scaricare il pdf (Pagina 17)

ROUBLESHOOTING

Symptom

Link LED does not light after connection is made.

Probable Causes

10BASE-T/100BASE-TX hub port, network card or cable may be

defective.

Possible Solutions

• Check that the host computer and hub are both powered on.

•

Be sure the network cable is connected to both devices.

• Verify that Category 5 cable is used if you are operating at 100

Mbps and that its length does not exceed 100 m (328 ft).

• Check the network card connections for defects.

• Replace the defective cable if necessary.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Nessun commento

SMC Networks SMC8036TX Manuale Utente Pagina 17