SMC Networks SMC2582W-B Manuale Utente Scaricare il pdf (Pagina 17)

Select an operational mode and click Save at the bottom of this page,and then you are brought

back to the start page.

2.4.3. Step 2: Configuring TCP/IP Settings

Fig. 8.TCP/IP settings.

Go to the TCP/IP Addressing section to configure IP address settings.The IP address can be manu-

ally set or automatically assigned by a DHCP server on the LAN.If you are manually setting the IP

address, Subnet mask, and Default gateway settings,set them appropriately, so that they com-

ply with your LAN environment.In addition,you can specify the Host name and Domain (DNS

suffix) of the SMC2582W-B.

When you are finished,click Save at the bottom of this page,and then you are brought back to the

start page.

2.4.4. Step 3: Configuring IEEE 802.11 Settings

Fig. 9.IEEE 802.11b communication settings.

Go to the IEEE 802.11, Communication section to configure IEEE 802.11b-related communication

settings,including Channel number and Network name (SSID).

The number of available RF channels depends on local regulations.

NOTE: The Regulatory domain setting of the SMC2582W-B sold in the U.S.and Canada is

not configurable.It is set to FCC by default.As a result,only channels from 1 to 11 are available.

NOTE: For two SMC2582W-Bs or one wireless client computer and one SMC2582W-B to establish

a wireless link,both devices must be configured with the same channel number and SSID.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Nessun commento

SMC Networks SMC2582W-B Manuale Utente Pagina 17